RTS KP-4016, Technical Manual

Page: 237 / 306

KP Series KP-4016/5032 Menu System 237
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
Menu System, Service
The information available for key assign is as follows:
Alphas
Aux Select
CWW
Display
Footswitch
Intercom Mode
Key View
Keypad
LCD Backlight
Local GPIO
Mirror
OMNEO Setup
Page Change
Reset Cfg
RVON Setup
Scrn Saver
Set Address
Snoop Tally
Test Panel
Service Menu, Alphas
The Alphas menu is used to select the alpha size (length) and type to be displayed for key assignments.
NOTE: When a Reset Cfg is performed, the Alpha Size, Poll ID, and Intercom Mode are not reset.
Available options are:
4 Chars
6 Chars
8 Chars
8 Chars (Unicode)
IMPORTANT: Keypanels on the same AIO-8, or on the same group of eight on an AIO-16, Zeus I/II (but not III), or
ADAM CS must have the same alpha size selected. But each group of eight can support a different
alpha size.
To set the alpha size , do the following:
1.
Starting at the Service|Alphas menu, select 4 Chars , 6 Chars , 8 Char , or 8 Chars (Unicode) .
2.
Press the SEL button .
Cancel and Save and Restart appear in the panel display.
3.
Using the arrow buttons, select Save and Restart .
4.
Press the SEL button .
The keypanel restarts itself with the new alpha size .