RTS KP-4016, Technical Manual

Page: 208 / 306

208 KP-4016/5032 Menu System KP Series
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
Audio Options Menu, Mic Mute
The Mic Mute menu is used to configure the actions of the Mic Mute key.
Available options are:
Disabled By disabling the mic mute key, users are not able to mute the microphone from the front panel.
Momentary The mic is muted for only as long as the mic mute key is held on.
Toggle The mic mute key is enabled. In this mode, pressing the mic mute key toggles the mic mute state on
and off.
By default, the Mic Mute menu is set to toggle .
To configure Mic Mute , do the following:
1.
Starting at the Audio Options menu, select Mic Mute .
2.
Press the SEL button .
Disable, Momentary and Toggle appear in the panel display .
3.
Using the left or right arrow buttons, select Disabled , Momentary , or Toggle .
4.
Press the SEL button .
An arrow appears next to the selected option .
Audio Options Menu, Min Volume
The Min Volume menu item is used to set the minimum volume level, in dB, for different sources on the keypanel. This is the
minimum volume level available when using the Main Volume and Aux Volume control knob, located on the front of the
keypanel.
Available sources are: Headset , Speaker , Aux 1 , Aux 2 , Matrix In , OMNEO 1 , and OMNEO 2 (OMNEO 3-8 available, if
licensed).
The range for this field is -48dB to 10dB , and Mute .
By default, this field is set to -6dB for Matrix In, all other options are set to Mute .
To set the min volume , do the following,
1.
Starting at the Audio Options|Min Volume menu, select the desired source .
2.
Press the SEL button .
The Min Volume: scroll box appears in the panel display.
NOTE: When Headset or Speaker is selected, you must designate the front or rear headset or speaker.
3.
Using the up and down arrow buttons, scroll to the minimum volume desired.
Audio Options Menu, Output Level
The Output Level menu is used to adjust the nominal audio output level to the matrix.
The range for this field is 0dB to 8dB .
By default, the output level is set to 8dB .
To set the Output Level , do the following:
>
Starting at the Audio Options|Output Level menu, adjust the output level .