RTS KP-4016, Technical Manual

Page: 169 / 306

KP Series Firmware Download 169
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
Display the FPGA Version on the Keypanel
To display the FPGA version currently installed in the keypanel , do the following:
1.
While pressing the Main Vol and Aux Vol encoders on the front of the keypanel at the same time, press the MENU
button .
The main menu appears in the panel display.
2.
Using the left and right arrow buttons, select Service .
3.
Press the SEL button .
The Service menu options appear in the panel display .
4.
Using the left and right arrow buttons, select FPGA Version .
5.
Press the SEL button .
Version X.X.X (where X represents the FPGA version numbers) appears in the panel display.
Download and Upgrade the FPGA to the KP-5032/4016
There are four (4) phases to upgrading the FPGA on a keypanel:
•
Downloading the FPGA firmware to the matrix
•
Downloading the FPGA firmware to the keypanel
•
Processing the download
•
Reprogramming the keypanel
To download the FPGA to the keypanel , do the following:
1.
Open AZedit .
2.
From the Status menu, select Software Versions|Keypanels.
The Keypanel Version Information window appears.
3.
Find the port number where the KP-5032/4016 is assigned.
4.
Highlight the Port (keypanel) to be updated.
You may select more than one at a time by holding CTRL key down while you select.
5.
Right-click the highlighted selections .
A popup menu appears.
6.
Select Download Firmware .
The Firmware Download window appears .
7.
Using the browse button, navigate to the FPGA file you want to use.