86
KP-32 User Manual
Bosch Security Systems, Inc.
User Manual
F.01U.193.253
Rev. 16
Configure the RVON-1 from the KP-812
Top Level Menu, Service, RVON Setup
Set the IP Address from the Service Level Menu
The RVON-1 card, when shipped has a default IP Address already configured. This must be changed in order for the RVON-1
card to function properly because the pre-configured IP Address may not work with you network.
To
set the IP Address
, do the following:
1.
On the KP-812, scroll to
Menu
.
The top level menu appears.
2.
Turning the encoder knob, scroll to
Service
.
3.
Tap the
encoder knob
to select Service.
The Service menu appears.
4.
Turning the encoder knob, scroll to
RVON Setup
.
5.
Tap the
encoder knob
to select RVON Setup.
The IP Address menu item appears
.
6.
Tap the
encoder knob
to select IP Address.
The actual IP Address appears
.
7.
Enter the
first number
in the IP Address.
This activates the first octet of the IP Address and clears the rest of the IP Address
.
8.
Tap the
encoder knob
.
This confirms the first octet in the IP Address and moves you to the second octet
.
NOTE:
Tap the encoder knob to skip over any octet that does not need modifications.
9.
Repeat steps
7
and
8
until the entire IP Address is entered.
10.
Tap the
encoder knob
.
The Netmask menu item appears
.
NOTE:
Once you have enter the IP Address, then enter the Netmask. The Netmask is a string of number similar to
an IP Address, except that it masks or screens out the network part of an IP Address so that only the host
computer part of the address remains (for example, 255.255.255.0).
11.
Tap the encoder knob to select
Netmask
.
The actual Netmask appears
.
12.
Enter the
first number
in the Netmask.
This activates the first octet of the Netmask and clears the rest of the Netmask
.
13.
Tap the
encoder knob
.
This confirms the first octet in the Netmask and moves you to the second octet.
NOTE:
Tap the encoder knob to skip over any octet that does not need modification.
14.
Repeat steps
13
and
14
until the entire Netmask is entered.
15.
Tap the
encoder knob
.
The Gateway IP Address menu item appears
.
NOTE:
Once you have entered the Netmask, you may need to enter the Gateway IP Address. A
Gateway
is a node
(for example, a computer) on a network that serves as an entrance to another network.
16.
Tap the encoder knob to select
Gateway
.
The actual Gateway IP Address appears
.
Summary of Contents for EKP-32
