manualshive.com logo in svg

RTS EKP-3016, Technical Manual, Page: 67 / 164

Share
Download
RTS EKP-3016 Technical Manual Download Page 67

KP-3016/KP-3016A Series

Firmware Download  69

Bosch Security Systems, Inc.

Technical Manual

 F.01U.315.927

Rev. 02

NOTE:

 

•

This can take up to 2 minutes to complete if connected via OMNEO and up to 15 minutes to complete if 
connected via AIO. Use the Keypanel Version Information window to follow the progress of the 
download. Also, the keypanel displays Firmware Download on the panel display until the download is 
complete.

•

The KP-3016/3016A resets itself once the firmware download is complete and the flash reprogrammed

.

•

While the firmware is downloading, chunk progress is displayed by incremental blocks. Also, the 
keypanel displays an icon warning not to turn off the panel while the flash is being reprogrammed.

12.

In the Keypanel Version Information window, verify the 

version upgrade

.

Download Firmware to the Keypanel Using the Firmware Upload Tool

Required Firmware version:

FWUT

V3.0.3 or later

IMPORTANT:

When downloading firmware using AZeidt , the file type used is a .mot file.When downloading 

firmware using the Firmware Upload Tool, the file type is a .capfw file.

To 

download firmware to the keypanel

, do the following:

1.

Open the 

Firmware Upload Tool

.

Summary of Contents for EKP-3016





































































































































































Reviews:

No comments