RTS EKP-3016, Technical Manual, Page: 19 / 164

KP-3016/3016A Series Installation 21
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
4.
From the Destination Type drop down menu, select OMI .
5.
In the Destination Device Name field, enter the name of the device to which the channel will connect.
OR
Click the
... button.
The Discovered Devices Window appears .
Expand the tree to view the available devices.
From the expanded tree, select the device to which you want to connect this keypanel.
Click OK .
6.
From the Destination Channel drop down menu, select the channel to which this keypanel will connect.
7.
Send the changes to the keypanel.
Connecting the KP-3016 through the OMNEO Offers Menu
IMPORTANT: If you used IPedit to set up the keypanel connection, this step not needed, because you have already
done this in the software.
If you used AZedit to set up the keypanel connection, the keypanel needs to be set up to talk with the OMI card in the frame.
To do this, a connection needs to be established using the OMNEO Offers menu on the keypanel. For more information, see
“Menu System, OMNEO Offers (Only available for KP-3016)” on page 120.
To configure a connection offer , do the following:
1.
Starting at the OMNEO Offers|Keypanel menu, select OKP .
2.
Press the SEL button .
A list of available OMNEO offers appears .
3.
Using the AUX/MENU shaft encoder, select the OMNEO offer you want to use.
An arrow appears next to the device .
4.
Press the CLR button to exit menu mode.
Power Up
At power-up, if the keypanel is connected to the matrix, the alphanumeric display shows dashes in the light blue color key
. After several seconds, the intercom key assignments are shown with the appropriate color keys and alphas.
NOTE: If the keypanel cannot establish communications with the intercom system, all keys continue to show asterisks
(****) and the Disconnected from Matrix icon appears in the panel display. If the keypanel is
configured for OMNEO, this icon also displays the OMNEO device name. Check the keypanel to matrix cable
connection if this occurs. If the keypanel loses communications with the intercom, the panel display shows the
Disconnected from Matrix icon and displays the after approximately 30 seconds.