9
OPERATING BASICS
Switching The Power On/Off
Adjusting The Volume
Selector Knob Adjusting Channel
Press the selector knob once to switch on the transceiver while
switch off, Press and hold it for 3 seconds to switch off while standby.
After switch on the transceiver, turn the channel selector knob, When
LCD displays "
SET VOLUME XX
" (XX shows for current volume
level), turn the channel selector knob to adjust volume, Clockwise-
up, anticlockwise-down.
Under channel mode, press the selector knob shortly, when the
screen show "DIAL", Turn selector knob clockwise to forward
channel, counterclockwise to backward channel.
In relevant modes, the Microphone [
UP/DWON
] key have the same
function of adjusting edited channel.(this transceiver shows only
edited channels).
Squelch Off / Squelch Off Momentary
Note:
The above functions should be set in software,
key become a
return key while in function setups.
key can be set as “
Squelch Off / Squelch Off Momentary
”
function. This function enable you to monitor weak signal.
1.
Squelch off: Press
key once to disable squelch, background
noise appears. Press
key again to resume squelch.
2.
Squelch Off Momentary: Press and hold
key to disable
squelch, background noise appears. Release
key to resume
squelch.
WORKING MODE
Channel number mode:
All setup in this mode should be operated in PC software.
Summary of Contents for DV 2055 Series
Page 1: ...DV 2055 2066 2135 2400 Series Mobile Radio...
Page 2: ......
Page 21: ......
Page 22: ...A6 161220...
