DKP-4016
DKP-4016 Menu System 195
Bosch Security Systems, Inc.
Technical Manual
F.01U.308.248
Rev. 03
Mode
Available selections for the Mode menu are:
Always On
Disabled
Switched
When set to Switched, the state of the Headset Spkr is controlled by the Mic Sel key.
NOTE:
The default for the left and right headset is
Always On
.
To
configure the Headset Spkr Mode
, do the following:
1.
Starting at the Audio Options|Headset Spkr menu, select
Left
or
Right
.
2.
Press the
SEL button
.
Auto-Transfer and Mode appear in the panel display.
3.
Using the left or right arrow buttons, select
Mode
.
4.
Press the
SEL button
.
Both, Left Chan, and Right Chan appear in the panel display
.
5.
Using the left or right arrow buttons, select the
mode
you want.
6.
Press the
SEL button
.
Always On, Disabled, and Switched appear in the panel display
.
7.
Using the left or right arrow buttons, select the
mode
.
8.
Press the
SEL button
.
An arrow appears next to the selected option.
Audio Options Menu, Inputs
The
Inputs
menu is used to enable or disable volume control for audio inputs through the front panel encoder. The DKP-4016
has four (4) Input connectors on the back panel of the unit. By default, all inputs are enabled. This means the inputs are visible
as inputs in the Mixing menu and (if mixed somewhere) can be selected for volume control.
If disabled, the inputs are not visible in the mixing menu and cannot be selected for volume control.
NOTE:
Disabling an input does not undo any of the mixes you had previously established in the Mixing menu; however,
it hides access to volume control of this input. This is useful if you want to set the matrix input volume, and then
want to disable the volume control so users cannot adjust the Matrix volume.
To
enable or disable an input
, do the following:
1.
Starting at the Audio Options|Inputs menu, select
Aux 1
,
Matrix In
,
OMNEO1
or
OMNEO2
(OMNEO 3-8 avail-
able, if licensed).
2.
Press the
SEL button
.
Disabled and Enabled appear in the panel display
.
3.
Using the arrow buttons,
select
Enabled
to enable the selected Input.
OR
Using the arrow buttons,
select
Disabled
to disable the selected Input
Summary of Contents for DKP-4016
