RTS DKP-4016, Technical Manual

Page: 191 / 282

DKP-4016 DKP-4016 Menu System 191
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Audio Options Menu, Chime
The Chime menu is used to set the volume for each of the built-in chimes, as well as to enable or disable preview of chimes
during chime selection in this menu and others that reference chimes.
Available configurable options for this menu are:
Preview When enabled, a preview of the chime is played each time a new chime is selected or while the
volume is being adjusted, so you can listen to what it sounds like.
Chime Allows the user to select between 12 system chimes. An additional four User chimes are added
when the Audio package is installed.
Volume Controls the volume of the chime.
This field ranges from
-60dB to 10dB.
The default for this field is -20dB .
To configure Chime on the keypanel , do the following:
1.
Starting at the Audio Options menu, select Chime .
2.
Press the SEL button .
The Preview, Chime, and Volume scroll boxes appear in the panel display.
3.
Using the up or down arrow buttons, select Yes or No for Preview.
4.
Using the left or right arrow buttons, select Chime .
5.
Using the up or down arrow buttons, select the system chime desired .
6.
Using the left or right arrow buttons, select Volume .
7.
Using the up or down arrow buttons, select the volume you want the chime to sound.
Audio Options Menu, Dim
To configure Dim on the keypanel , do the following:
1.
Starting at Audio Options, select Dim .
2.
Press the SEL button .
Headset and Speaker appear in the panel display .
3.
Using the left or right arrow buttons, select Headset or Speaker .
4.
Press the SEL button .
Front and Rear (or left and right if Hdst was chosen) appear in the panel display.
5.
Using the left or right arrow buttons, select Front or Rear (if Hdst was chosen, Left or Right).
6.
Press the SEL button .
The Dim Amount scroll box appears .
7.
Using the up or down arrow buttons, select the Dim Amount you desire.