RTS DKP-4016, Technical Manual

Page: 132 / 282

132 Basic Operation DKP-4016
Bosch Security Systems, Inc.
Technical Manual F.01U.308.248 Rev. 03
Tone Generator Group Box
The Tone Generator group box is used to define the tone frequency. The tone generator is used to check the audio path from
the keypanel to the matrix.
Available selections for this menu are:
500Hz Tone (default)
1kHz Tone
To configure the tone generator , do the following:
>
From the Tone Frequency drop down menu, select 500 Hz or 1000 Hz .
VM Options Group Box
The VM Options group box is used to configure voice messaging playback options and recording options.
For more information, see “Audio Options Menu, VM Options (Audio Package Only)” on page 202.
To configure voice messaging options , do the following:
1.
Select the Isolate During Playback check box to remove all other audio from the speaker or headset when playing
back voice messages.
2.
From the When Mailbox Full drop down menu, select Reject New or Delete Oldest .
3.
From the Auto-Record drop down menu, select Disabled or Rolling Buffer .
FIGURE 62.
Audio Options Page – Tone Generator Group Box
FIGURE 63.
Audio Options Page – VM Options Group Box