RTS DKP 16 CLD, User Manual

Page: 46 / 232

36 Basic Operation KP32CLD
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
Call Waiting Operation
Occasionally, a keypanel may call and there is not a key assigned to talk back to the caller. In this case, the caller’s name
appears in the
CWW (Call Waiting Window). For CWW key location, see “Reference View - KP 32 CLD” on page 6.
NOTE: In version 1.1.1 and later, the KP CLD family of keypanels supports a graphical call waiting window. For more
information, see “Graphical Call Waiting Window” on page 37.
To answer a CWW call , do the following:
>
Press down and hold the CWW key to talk back.
To clear a name from the CWW window , do the following:
>
When the CWW window is populated, tap up on the CWW key.
NOTE: If a second call is received in the CWW while a caller name is already displayed, the Call Waiting window
flashes.
To answer a second call , do the following:
>
Tap up to clear the first name, and then hold the key down to talk to the second caller.
NOTE: By default, only the names of callers who are not currently assigned to intercom keys appear in the call
waiting window. Alternately, you can force all caller names to display in the call waiting window. this is
controlled by DIP Switch 2 on the ADAM Master Controller card or the
Always stack callers in the call
waiting window option found in AZedit ( Options|Intercom Configuration|Options ). Setting this option in
AZedit overrides the DIP Switch 2 setting on the Master Controller.