RTS DKP 16 CLD, User Manual

Page: 151 / 232

KP32CLD KP 32 CLD Menu System 141
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
Service Menu, Snoop Tally
Snoop Tally , when enabled indicates to keypanel users that somebody is listening to them. For example, snoop tallies are
displayed on keypanel 1, if there is another keypanel (2) which is listening to keypanel 1 via a point-to-point or a special list,
but is not talking to keypanel 1. Snoop tallies are suppressed if keypanel 1 has any talk keys turned on, or if the hot mic is not
enabled. Snoop tallies are supported on KP-32 family keypanels.
NOTE: Hot Mic must be activated on the keypanel for snoop tally to work. For more information, see “Audio Options
Menu, Matrix Out” on page 82.
By default, snoop tally is disabled (no chime).
To enable snoop tallies on the keypanel , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Service .
3.
Press the SEL button.

The Service submenu appears in the display window.
4.
Using the 3(

) or 6(

), select Snoop Tally .
5.
Press the SEL button.

Chime and No Chime (default) appear in the display window.
6.
Using the 3(

) or 6(

), select Chime .
7.
Press the SEL button.

A blue arrow appears next to Chime. Snoop Tally is enabled .
To disable snoop tallies on the keypanel , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Service .
3.
Press the SEL button.

The Service submenu appears in the display window.
4.
Using the 3(

) or 6(

), select Snoop Tally .
5.
Press the SEL button.

Chime and No Chime (default) appear in the display window.
6.
Using the 3(

) or 6(

), select No Chime .