RTS DKP 16 CLD, User Manual

Page: 117 / 232

KP32CLD KP 32 CLD Menu System 107
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
10.
Press down on the keypanel key position where you want the Special List assignment to appear.

The key color changes to tan and the alpha appears on the key .
Key Assign Menu, Sys Relay
Sys Relay refers to any of several types of control devices that can exist in the intercom system, including:
•
The 8 GPI outputs from an ADAM Frame (J11 on the XCP-ADAM-MC Breakout Panel).
•
The 8 GPI outputs from an ADAM CS Frame (J903on the ADAM CS back panel).
•
The relay outputs of an FR9528 Relay Frame (RELAY OUTPUTS connector on the FR9528 back
panel).
•
The 16 GPI outputs of a UIO-256 or GPIO-16 Frame (J5 on the UIO-256/GPIO-16 back panel).
To assign a Relay to the keypanel key , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Key Assign .
3.
Press the SEL button.

The Key Assign submenu appears .
4.
Using the 3(

) or 6(

), select Sys Relay .
5.
Press the SEL button.

A scroll list of available Relays appears.
6.
Using the 3(

) or 6(

), select the relay you want to assign to the keypanel key.
7.
Press the SEL button.

A list of auto-functions appear (see Figure 32, “Auto Functions,” on page 110).
8.
Using the 3(

) or 6(

), select the auto-function you want to assign to the relay assignment, if applicable.
9.
Press the SEL button.

Tap Key appears .
10.
Press down on the keypanel key position where you want the Relay assignment to appear.

The key color changes to magenta and the alpha appears on the key .