BTR-80N, TR-80N, TR-82N
Operation 59
Low Battery Alert Tone
The beltpack sends an audio alert tone to the headset if battery
life reaches 10%. The 1 kHz tone is heard for 0.5 seconds, every
30 seconds. The tone is only heard and set at the beltpack.
To
set the low battery alert tone
, do the following:
1.
Press
SET
at the battery percentage screen.
A screen appears displaying
Lbt oFF.
The low battery tone option also flashes
2.
Using the UP/DOWN arrow buttons, turn the
low battery
tone option
on or off.
3.
Press
SET
to accept the change.
The screen now displays with AL or ni flashing.
4.
Using the UP/DOWN arrow buttons, select
AL or ni
for
Alkaline/NiMH battery gauge calibration.
5.
Press
SET
to return to the battery gauge screen.
Transmit Power
The
Transmit Power
screen displays the current setting of the
beltpack transmitter’s output power level. There are four (4)
settings.
Transmit Power Settings
When the unit is set to auto, base station information tells the
beltpack the appropriate power settings to use based upon the
received signal strength level at the base station. By reducing
the transmit power when possible, the battery life of the
beltpack can be slightly extended and intermodulation products
can be reduced.
Changing the Transmit Power Setting
To
change the transmit power setting
, do the following:
1.
Push SET at the transmit power screen.
2.
Using the UP/DOWN arrow buttons, select the power
setting.
3.
Push SET to place the unit at the indicated setting.
FIGURE 76.
Transmit Power, Squelch,
Push-to-Talk/Push-to-Transmit Screen
(20 mW for US 3 band units)
Auto
(Default)
The beltpack’s transmitter adjusts its output
level according to information sent to the
beltpack from the base station. It adjusts
between tow (2) levels: 5mW or 50 mW, 5
mW or 20 mW for US 3 band units.
5
The beltpack transmits at 5 mW
50 or 20
The transmitter is at 50 mW (20 mW for US
3 band units)
100 or 20
The transmitter is at 100 mW (20 mW for
US 3 band units)
Summary of Contents for BTR-80N
