BTR-800, TR-800, TR-825
System Operation 53
Receive 1 Screen
The Receive 1 screen allows the user to set the beltpack receive
1 frequency. This corresponds to the base station’s transmit 1
frequency. In factory-defined groups, receive 1 is not
changeable. User-programmable groups will allow the user to
change the frequency in 25 kHz steps.
•
Press [MENU] twice from the group/channel screen to
arrive at the receive 1 frequency screen.
•
(User-Programmable Groups Only) Press [SET] to edit the
frequency. The number will start flashing. Factory-defined
groups can’t be changed; so pressing set will do nothing at
this screen. User-programmed groups will start flashing and
allow the user to change the frequency in 25 kHz steps.
•
(User-Programmable Groups Only) Use the [UP]/[DOWN]
arrow buttons to change the frequency.
•
(User-Programmable Groups Only) Press [SET] to place
the beltpack on the frequency selected. If set is held down,
during that time the group is displayed so the user is aware
of what group the unit has been placed. Once set is released,
the unit returns to the receive 1 frequency screen with
nothing flashing.
•
(User-Programmable Groups Only) Pressing [SET] once
more will start the editing sequence over again. Pressing
[MENU] during receive 1 frequency edit will end editing
and send the user back to the receive 1 screen without any
changes.
Summary of Contents for BTR-800
