52 System Operation
BTR-800, TR-800, TR-825
Transmit Screen
The Transmit screen allows the user to set the beltpack transmit
frequency. Factory-defined groups will allow only a set number
of pre-defined frequencies to be selected. User-programmable
groups will allow the user to change the frequency in 25kHz
steps.
•
Press [MENU] once from the group/channel screen to
arrive at the transmit frequency screen.
•
Press [SET] to edit the frequency. The number will start
flashing.
•
Use the [UP]/[DOWN] arrow buttons to change the
frequency.
•
Press [SET] to place the beltpack on the frequency selected.
If set is held down, during that time the group/channel is
displayed so the user is aware of what transmit channel the
unit has been placed. Once set is released, the unit returns to
the transmit frequency screen with nothing flashing.
•
Pressing [SET] once more will start the editing sequence
over again. Pressing [MENU] during transmit frequency
edit will end editing and send the user back to the transmit
screen without any changes.
Summary of Contents for BTR-800
