RTP 3000 TAS, Technical Manual

Page: 5 / 30

5
Note: The 3000M and 3100M system do not support redundant I/O modules nor
Sequence-Of-Events. They also do not support 3000/02-004 MODBUS TCP/IP Cards,
3000/01 Series Counter Cards or Servo Cards.
Factory system model numbers are prefixed as following:

3000S/R2-XYZ Single Node Processor System

3000SH/R2-XYZ Single Node Processor System with HumiSeal©
conformal coating

3000D/R2-XYZ Dual Node Processor System

3000DH/R2-XYZ Dual Node Processor System with HumiSeal©
conformal coating

3000T/R2-XYZ Triple Node Processor System

3000TH/R2-XYZ Triple Node Processor System with HumiSeal©
conformal coating

3000Q/R2-XYZ Quad Node Processor System

3000QH/R2-XYZ Quad Node Processor System with HumiSeal©
conformal coating

3000R/R2-XYZ Remote Chassis

3000RH/R2-XYZ Remote Chassis with HumiSeal© conformal coating

3000M/R2-XYZ Micro Processor Chassis

3000MH/R2-XYZ Micro Processor Chassis with HumiSeal©
conformal coating
*System Model numbers may also begin with 3100 instead of 3000
XYZ is factory assigned number that determines the number of I/O slots, number of
Chassis Processors, number and type of power supplies within the chassis, and number
of redundant chassis.
Please consult factory for model numbers when ordering.
3200T Nodes
A 3200T Node can contain up to two 3200 Node/Chassis Processors and up to 4
chassis. Based on your processor configuration, you can have up to 18 I/O slots
available in the chassis. I/O cards can be installed in slots 0 through 17, which
correspond to slots 00 through 17 in the NetArrays I/O Configuration form.
The 3200T Node can be used as a standalone systems or configured in a domain
architecture that contains up to 14 3200T Nodes.
Factory system model numbers are prefixed as following:

3200/R3-XYZ
XYZ is factory assigned number that determines the number of 3200 Node/Chassis
Processors, number of I/O slots, number and type of power supplies within the chassis,
number of redundant chassis, and if the system will include HumiSeal© conformal
coating.
Please consult factory for model numbers when ordering.