Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
X501M Reference Manual V2.2
16
Download and install NVIDIA SDK Manager.
sdkmanager
Installation package
：
sdkmanager-[version].[build#].deb
The current version is
：
sdkmanager_1.2.0
sdkmanager
install
$ sudo apt install ./sdkmanager-[version].[build#].deb
Connect your jetson device to the Linux host
Prepare your Jetson device for the following settings. (If the equipment system is not initialized, the system
user needs to initialize after power-on)
- Connect the monitor, keyboard and mouse to the Jetson Feiyun smart box device (please refer to the
interface description above).
-
Use USB cable to connect Linux host and Jetson Feiyun Smart Box (or network (same network
segment))
-
During the setup process, SDK Manager will provide Internet connection for your jetson Feiyun
Smart Box via USB or network connection.
-
Connect the supplied power adapter to the DC jack of the Feiyun Smart Box, and plug the AC
interface into an AC power outlet.
Test that your device can connect via ssh.
If connected via USB, enter lsusb under the Linux host terminal to see the nvidia crop
The device can be accessed through ping or ssh commands
$ ping 192.168.55.1
or
$ ssh <jetson_user>@192.168.55.1
If connected via a network, check whether the device ip address is in the same network segment as the Linux
host on the Feiyun Smart Box, and the Feiyun Smart Box device can be accessed through the ping or ssh
command.
$ ping <jetson_ip>
or
$ ssh <jetson_user>@<jetson_device_ip>
Use SDK Manager to select and install the required components
NVIDIA SDK Manager supports installing software to Jetson core (Flying Cloud Smart Box). For
complete instructions, please refer to Chapter 5 of "
".
3.3 Sample application
JetPack includes several examples that demonstrate the use of JetPack components.
They are stored in the reference file system and can be compiled in the developer toolkit.
