Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
X501M Reference Manual V2.2
14
Software version supporting instructions
X501M is a complete product with Jetson TX2 module as the core. Provide developers with one-stop terminal
equipment to assist developers in application development.
X501M Feiyun Smart Box supporting software includes:
-
L4T (Linux for Tegra): L4T provides "OS" for your Feiyun Smart Box, including Linux kernel, boot
loader, board support package (BSP) and sample file system. (By default, the pure system has been
installed for the device, Jetpack needs to be installed by itself)
-
Jetpack: Jetpack sdk is the most comprehensive solution for building AI applications. It includes software
libraries and apis, examples, developer tools and documentation for the latest and previous versions of
Jetson products.
1 use
1.1 Smart box power on and start
a) Ensure that the voltage of all external systems is turned off
b) Install necessary external cables. (Such as: the display cable connected to the HDMI monitor, the
USB cable connecting the keyboard and mouse, etc.)
c) Connect the matching power adapter to the DC jack of the Feiyun Smart Box, and plug the AC
interface into an AC power outlet.
d)
X501M adopts automatic power-on design, when the power is turned on, the system automatically
powers on and starts
1.2 Recovery Mode
The Jetson TX1/TX2 core module works in both normal and Recovery mode. In the Recovery mode, file
system update, kernel update, Boot Loader update, BCT update and other operations can be carried out.
X501M To enter Recovery mode:
b)
Turn off the system power supply
c)
Use USB cables to connect X501M dual USB3.0 sockets to the bottom port of the Host(PC)
development host USB port.
d)
Short connect 3 and 5 pins of GPIO connector, turn on the power switch to supply power to the
system, keep power supply for more than 3 seconds, and then disconnect the short wiring of 3 and 5
pins of GPIO connector.
e)
The system enters the Recovery mode, and subsequent operations can be carried out at this point.
2 L4T
（
Linux for Tegra Abbreviation
“
L4T
”）
L4T provides "OS" for your Feiyun Smart Box, including Linux kernel, boot loader, board support package
(BSP) and sample file system.
X501M Smart Box is working on a system burned with the official original version of NVIDIA Linux
For Tegra (L4T). HDMI, Gigabit Ethernet, USB2.0, serial port, GPIO, SD card, I2C bus can all be supported.
But Mini-PCIe, M.2, USB3.0, fan interface, etc. cannot work normally.
