manualshive.com logo in svg

RTI TheaterTouch T2, User'S Manual And Programming Manual

Share
Download
RTI TheaterTouch T2 User'S Manual And Programming Manual Download Page 107

Chapter 9 • Service and Support 

97

 

SHIPMENT OF REMOTE FOR SERVICE 

 

Remote Technologies Incorporated will pay all labor and material expenses for all 
repairs covered by this warranty. If necessary repairs are not covered by warranty, or 
if a unit is examined which is not in need of repair, you will be charged for the 
repairs or examination. 

 

If it is necessary to ship the 

TheaterTouch 

system controller for service:  

 

Please pack it securely and we suggest that it be insured. 

Do not include accessories such as power cords or manuals. 

Please back up your internal program. Although every effort is made to save this 
data and reload it after repair, Remote Technologies Incorporated is neither liable 
for its loss, nor responsible for providing a back up for you. 

 

You must pay any shipping charges incurred in getting your 

TheaterTouch 

system 

controller to Remote Technologies Incorporated. Remote Technologies Incorporated 
will pay reasonable return shipping charges via a carrier of our choice to any 
destination within the United States if the repairs are covered under warranty. 

 

A copy of the original dated sales receipt must be provided whenever warranty 
service is required. You will need this receipt to establish the date of purchase. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for TheaterTouch T2























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands