70-210127-20 V1.0
Quick Reference Guide
Port Control Module
PCM-4
It’s Under Control
®
With four multi-purpose I/O ports and a voltage trigger output, the PCM-4 provides the flexibility to
increase the I/O capabilities of an RTI XP series control processor to accommodate larger projects.
Each MPIO port provides IR output and routing capabilities, one-way RS-232 communication (with
CM-232) and power sensing (with RTI accessory devices). Control from the XP series control
processor is communicated using the LAN (Ethernet - Local Area Network). This allows the MPIO
ports of the PCM-4 to become a seamless extension of the processor’s existing ports.
The PCM-4 provides superior quality and reliability as well as these specific features:
Expands I/O port capabilities of an RTI XP series control processor (IR, one-way RS-232,
sensing).
Ethernet port provides control and updating over the LAN (Local Area Network).
Virtually unlimited number of PCM-4 units in one system.
I/O ports are compatible with industry standard IR emitters, blasters, and repeater systems.
Variable IR output on all ports.
LED illuminates when ports are active.
I/O ports support all optional RTI power sensing and communications modules.
One 12VDC/100mA voltage trigger output.
Powered using included power supply or PoE (Power over Ethernet).
USB port for on-site firmware updates.
Sturdy steel construction.
Safety Suggestions
Read and Follow Instructions. Read all safety and operating instructions before operating the unit.
Retain Instructions. Keep the safety and operating instructions for future reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers, stoves, etc., including amplifiers that produce
heat.
Power Sources. Use only batteries of the type described in the operating instructions, or as marked on the unit.
Water and Moisture. Do not use the unit near water—for example, near a sink, in a wet basement, near a swimming pool,
near an open window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be spilled into the enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating instructions. Refer all other service needs to
qualified service personnel.
Damage Requiring Service. The unit should be serviced by qualified service personnel when:
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in performance.
The unit has been dropped or the enclosure has been damaged.
Limited Warranty
RTI warrants its products for a period of one (1) year (90 days only for included battery packs); or for a period of time
compliant with local laws when applicable from the date of purchase from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners during the warranty period, so long as the
original dated sales receipt or other proof of warranty coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are
not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or removed.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference that may cause undesired operation.
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website at: www.rticorp.com/declaration
Federal Communications Commission Notice
N27917
If you are encountering any problems or have a question about your RTI
product, please contact RTI Technical Support for assistance (see the
Contacting RTI section of this guide for contact details).
RTI provides technical support by telephone or e-mail. For the highest quality
service, please have the following information ready, or provide it in your
e-mail.
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in
your system, a description of the problem, and any troubleshooting you have
already tried.
Please do not return products to RTI without a return authorization.
Service & Support
For news about the latest updates,
new product information, and new
accessories, please visit our web site at:
www.rticorp.com
For general information, contact RTI at:
Remote Technologies Incorporated
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
Contacting RTI
Copyright © 2013 • Remote Technologies Incorporated • All rights reserved.
Key Features
