16 |
P a g e
01/2019
RTI | Miravue VIP-1 Manual
7)
Controlling External Devices Via IR and RS-232
If Miravue VIP-1 devices are being utilized for IR or RS-232 control of external devices from the RTI control
system, you must set them up as expansion devices in the Integration Designer System File. Select the
processor in the system tree and then “Expansion Devices” in the partition to the right. Next, select “Add
Expansion Device” and select “VIP-1” from the list of expansion devices available.
An “Edit VIP-1” popup window will appear. For easier identification, it is recommended to name the Miravue
device the same or similar to the project file. Select the MAC radio button and enter the MAC Address you will
find on the label at the bottom side of the VIP-1 unit.
