RTD Embedded Technologies, Inc.
|
www.rtd.com
43
LAN35MH08HR & LAN35ME08HR User’s Manual
aaa Authentication, Authorization and Accounting
access Access management
access-list Access list
aggregation Aggregation mode
banner Define a login banner
clock Configure time-of-day clock
default Set a command to its defaults
do To run exec commands in config mode
dot1x IEEE Standard for port-based Network Access Control
enable Modify enable password parameters
end Go back to EXEC mode
eps Ethernet Protection Switching.
erps Ethernet Ring Protection Switching
evc Ethernet Virtual Connections
exit Exit from current mode
green-ethernet Green ethernet (Power reduction).
gvrp Enable GVRP feature
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Internet Protocol
ipmc IPv4/IPv6 multicast configuration
-- more --, next page: Space, continue: g, quit: ^C
<Space>
ipv6 IPv6 configuration commands
json JavaScript Object Notation RPC
lacp LACP settings
line Configure a terminal line
lldp LLDP configurations.
logging System logging message
loop-protect Loop protection configuration
mac MAC table entries/configuration
mep Maintenance Entity Point
monitor Monitoring different system events
mvr Multicast VLAN Registration configuration
network-clock network-clock
no Negate a command or set its defaults
ntp Configure NTP
port-security Enable/disable port security globally.
privilege Command privilege parameters
ptp Precision time Protocol (1588)
qos Quality of Service
radius-server Configure RADIUS
rmon Remote Monitoring
sflow Statistics flow.
snmp-server Set SNMP server's configurations
spanning-tree Spanning Tree protocol
-- more --, next page: Space, continue: g, quit: ^C
<Space>
switchport Set switching mode characteristics
tacacs-server Configure
thermal-protect Thermal protection configuirations.
upnp Set UPnP's configurations
username Establish User Name Authentication
vlan VLAN commands
voice Voice appliance attributes
web Web
(config)#
In configuration mode, the list of available commands changes. Press
?
to see a list of possible configuration commands. It is possible to invoke
an exec mode command by prefixing it with
do
. For example, in exec mode, one would use the command
show running-config
to show the
current configuration. In configuration mode, this command would be
do show running-config
.
To alter the switch configuration, use the configuration mode commands. One can use the ICLI online help to discover available commands, or
use the command reference files provided with the Managed Switch Firmware package. When done configuring the switch, use
exit
to exit
configuration mode. Multiple uses of
exit
will bring you to the exec level, or you can use
end
to bring you directly back to the exec level.