
RTD Embedded Technologies, Inc.
|
www.rtd.com
8
SYNC25104HR/
SYNC35104HR
User’s Manual
1.3
Board Features
•
PC/104 form factor
•
Bus Structure Options:
o
PCIe/104 (SYNC35104HR)
PCIe universal expansion bus (Type 1 or Type 2)
o
PCI/104-Express (SYNC25104HR)
PCIe universal expansion bus (Type 1 or Type 2)
PCI pass-through expansion bus
•
USB 2.0 interface
o
GNSS receiver is accessible via a USB serial converter
o
Synthesizer is accessible via a USB SPI converter
•
u-blox LEA-M8F GNSS engine
o
L1 1575.42MHz, C/A code
o
L1OF 1602MHz
o
BeiDou B1 1561.098MHz
o
Galileo E1B/C
o
72-channel satellite tracking
o
Position accuracy: 2.5m
o
Time accuracy of 20ns
o
1Hz update rate
o
Tracking sensitivity down to -165 dBm
o
Supported protocols: NMEA-0183 ver. 2.3, 4.0 or 4.1 configurable, UBX, RTCM 2.3
o
Constellation System Support:
GPS
GLONASS
GALILEO
BeiDou
QZSS
o
DGPS support:
(SBAS) Satellite-Based Augmentation System
(RTCM) Radio Technical Commission for Maritime Services
(WAAS) Wide-Area Augmentation System
(EGNOS) European Geo-Stationary Navigation System
(MSAS) MTSAT Satellite-Based Augmentation System
(GAGAN) GPS-Aided Geo-Augmented Navigation
•
Supports active (+3.3V) and passive antennas
•
SI5395 ultra low jitter clock multiplier
o
8 any frequency outputs
4 differential outputs on a 100mil header
2 single ended outputs on MMCX connectors
2 differential outputs on the SyncBus connector (Bus LVDS)
o
Software configurable output standard and frequency
Differential: 100Hz-1028MHz
LVCMOS (single-ended): 100Hz-250MHz
•
Requires only +5 VDC for operation