RTD Embedded Technologies, Inc.
|
www.rtd.com
64
DM34216HR
User’s Manual
BDM-610010056 Rev A
6.6.9
INT_STAT
(R
EAD
/C
LEAR
)
Each bit corresponds to an interrupt source. Reading a value of ‘1’ indicates that an event has occurred. Reading a value of ‘0’ indicates that
the event has not occurred. Writing a ‘1’ will clear that bit.
B0: Capture Window
–
Indicates state of window, high when during capture and low when during delay
B1: Reserved
B2: Reserved
B3: Start Trigger
B4: Reserved
B5: Reserved
B6: Reserved
B7: Reserved
6.6.10
CLK_BUS
N
Selects a source to drive onto Clock Bus N. That clock bus can then be used by a different function block as a clock source or trigger.
A function block can drive multiple different Clock Buses. However, a Clock Bus N should not be driven by more than one function block at the
same time or the clock signal will be undefined.
B[7:0]:
o
0x00: Disabled (Default)
o
0x80: Capture Window
–
Indicates state of window, high when during capture and low when during delay
o
0x81: Reserved
o
0x82: Reserved
o
0x83: Start Trigger
o
0x84: Reserved
o
0x85: Reserved
o
0x86: Reserved