background image

13

AP21 Programming Manual

lIMITED PRODuCT WARRANTY

RTC Manufacturing, Inc. (RTC) warrants its products to be free from defects in materi-
als and workmanship for a period of five (5) years from the date of purchase provided: 

 

 

the product was properly installed, used, operated and maintained; 

and

 

 

the customer has proof of the date of purchase

RTC will, at its option, either repair or replace the defective product.

The customer at its cost shall deliver the defective product to RTC, and RTC will         
repair or replace the product and return it to the customer at RTC’s cost. 

RTC will not be responsible for damage caused by electrical surges, brownouts,    
blackouts, lightning or any other act of God or electrical event. 

PRODuCT ExCEPTIONS:

— Cellular Modem equipment carries the same warranty above, except the term is for  
  a period of two (2) years. Extended modem warranties are available for purchase. 

— Radio Equipment carries the same warranty above, except the term is for a period   
  of one (1) year. 

— Batteries carry the same warranty above, except the term is for a period of           
  two (2) years. 

Summary of Contents for AP21 Series

















Reviews: