BACnet/IP Server Object Configuration – CharacterString Value
Objects
Click the
Set Up BACnet Names, Units, and COV
button at the bottom of the BACnet/IP Server
Configuration page to access the Object Configuration page for this device.
When in Auto-Server Mode, these fields are not configurable.
Follow these steps to configure Binary Inputs or Outputs in Manual Mode.
1)
Select
CharacterString Value Read
or
CharacterString Value Write
from the upper left
dropdown menu.
2)
Select a
Group
to use.
These group names are defined in this under BACnet Advanced configuration.
3)
Enter a
Name
to identify this object on the network.
The combination of
Group
and
Name
should be unique for each point in the gateway.
Real Time Automation, Inc.
22
1-800-249-1612