BACnet/IP Server Configuration-Data Groups
The bottom area of the BACnet/IP Server Configuration page lets you configure multiple objects for
Read and Write Groups.
There are two ways to configure this protocol:
•
Auto-Server Mode(Default)
•
Manual Mode
NOTE
: You may go back and forth between modes, but when reverting from Manual Mode to Auto-
Server Mode, all changes made in Manual Mode will be discarded.
The setup in the example above will give you the following results:
1 AI is created with the address of AI1
8 BIs are created with the addresses BI1 through BI8
500 AOs are created with the addresses AO1 through AO500
1 CSV is created with the address of CSV51
Real Time Automation, Inc.
18
1-800-249-1612
