Real Time Automation, Inc.
26
1-800-249-1612
EtherNet/IP Adapter Mapping Configuration
RSLogix and RTA both define the naming convention differently for the points defined. This example will
reference how the RTA gateway mapping references RSLogix.
Below the RTA gateway is configured as follows.
Within the PLC the Comm Format is selected as Data
–
INT with a size of 48 (16-bit).
NOTE:
RTA data size is in bytes, so if PLC Comm Format is Data
–
INT, then divide the RTA
Input/Output
size by 2. If the PLC Comm Format is Data
–
DINT, the by divide the RTA
Input/Output
size by 4.
