Real Time Automation, Inc.
11
1-800-249-1612
Mounting with a DIN Rail
Installing
Follow these steps to install your interface converter.
1)
Mount your DIN Rail.
2)
Hook the bottom mounting flange under the DIN Rail.
3)
While pressing the 460BMSUS-NNA1 against the rail, press up to engage the spring loaded lower clip
and rotate the unit parallel to the DIN Rail.
4)
Release upward pressure.
Removing
Follow these steps to remove your interface converter.
1)
Press up on unit to engage the spring loaded lower clip.
2)
Swing top of the unit away from DIN Rail.
DIN Rail
Spring Loaded Lower Clip
