RST Flexi-Mux Instruction Manual
ELM0029B
RST Instruments Ltd.
Page 8
F
IGURE
5-2
DIP
SWITCH LOCATION
T
ABLE
5-1
DIP
SWITCH POSITIONS
Switch
No.
4-Pole
2-Pole
1
(off)
(on)
2
(off)
(on)
3
X
(not used)
X
(not used)
4
(on)
(off)
5.3
C
ONNECTION
E
XAMPLES
The following illustrations depict some connection examples for using the RST Flexi-Mux
in conjunction with Campbell Scientific CR6 dataloggers. Please note that the following
sections are simply meant as an overview of the many ways an RST Flexi-Mux can be
used. Many custom applications can be created. Contact RST Instruments Ltd. for more
details.
5.3.1
2-Wire Serial Switching
Figure 5-3 shows typical configuration for an MPBX setup with a CR6. The MUX is setup
in 2X10 mode and only utilizing A and B to take a reading. See Appendix A for sample
program.
DIP Switches