96
Dynamics
Dynamics
fig.GateKeyInFlow.eps
The key-in signal used by the gate/expander is taken from the post-
filter point of CH1–CH48.
Use the KEY-IN SELECT popup to select the key-in signal.
KEY-IN SELECT popup
fig.PopKeyInGuide.eps
1.
Current key indication
This indicates the current key.
2.
Dynamics type indication
This indicates the type of dynamics to which the KEY-IN
SELECT popup applies.
3.
Key-in signal select buttons
These buttons select the channel that will be used as the key-in
signal.
In the KEY-IN SELECT popup, the function buttons perform the
following operations.
Accessing the KEY-IN SELECT popup
1.
Move the cursor to the KEY-IN SELECT popup button and
press [ENTER].
The KEY-IN SELECT popup will appear.
fig.PopKeyIn.eps
Selecting the key-in signal
1.
Access the KEY-IN SELECT popup.
fig.PopKeyIn.eps
2.
Use [F1 (CH 1–24)] or [F2 (CH 25–48)] to view the desired
key-in signal select buttons.
3.
Move the cursor to the desired key-in signal select button,
and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
If you want the channel itself to be its own key-in signal, press
[F6 (SELCT SELF)].
Selecting the key-in signal for the
gate/expander
FILTER
COMP
GATE
Gate
KEY-IN
To Gate
KEY-IN
1
2
3
[F1 (CH 1–24)]
Displays CH1–CH24 as the key-in signal
select buttons.
[F2 (CH 25–48)]
Displays CH25–CH48 as the key-in signal
select buttons.
[F6 (SELECT SELF)]
Selects the channel itself as its own key-in
signal.
[F8 (CLOSE)]
Closes the popup.
M-400_v15_e.book 96 ページ ２００８年６月２０日 金曜日 午後４時５分
