RSS M-400 Owner'S Manual Download Page 202

Page: 202 / 253

202

Other settings and functions

Use the DATE&TIME popup of the SYSTEM screen to set the date
and time.

fig.ScrSysDateTimeGuide.eps

HOUR knob

This specifies the current hour in a range of 0–23.

MINUTE knob

This specifies the current minute in a range of 0–59.

SECOND knob

This specifies the current second in a range of 0–59.

FORMAT select buttons

These buttons select the format of the date.

You can choose one of the following formats.

YEAR knob

This specifies the year in a range of 2000 to 2099.

MONTH knob

This specifies the month in a range of 1–12.

DATE knob

This specifies the date in a range of 1–31.

In the DATE&TIME popup, the function buttons perform the
following operations.

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F5 (DATE TIME)].

fig.ScrSysDateTime.eps

The DATE&TIME popup will appear.

Use the HOUR, MINUTE, and SECOND knobs to specify the
time.

Press [F6 (SET)] to finalize the setting.

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F5 (DATE TIME)].

fig.ScrSysDateTime.eps

The DATE&TIME popup will appear.

Use the FORMAT select buttons to select the date format.

Use the YEAR, MONTH, and DATE knobs to specify the
date.

Press [F6 (SET)] to finalize the setting.

Date and time settings

DATE&TIME popup

MM/DD/YYYY

Month/Date/Year

DD/MM/YYYY

Date/Month/Year

YYYY/MM/DD

Year/Month/Date

[F6 (SET)]

Finalizes the specified date and time.

[F8 (CLOSE)]

Closes the popup.

Specifying the time

Specifying the date

M-400_v15_e.book 202 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands