RSS M-400 Owner'S Manual Download Page 198

Page: 198 / 253

198

Other settings and functions

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F1 (INIT)].

The INITIALIZE popup will appear.

fig.ScrInitGuide.eps

Initialize section select buttons

These buttons select the section(s) to be initialized.

Use the initialize section select buttons to select the
section(s) that you want to initialize.

You can select the following sections.

SYSTEM SETTING includes the following items.

• The M-400’s sampling frequency setting

• Lamp, panel, and display brightness settings

• Fader touch sensitivity setting

• REAC settings

• Remote settings

Press [F8 (OK)].

fig.ScrInitConf.eps

A message will ask you to confirm that you want to initialize
the settings.

When you press [F8 (INIT)], the section you selected in step
3 will be initialized.

If you press [F7 (CANCEL)], the operation will be cancelled.

Initializing the mixer settings

MIXER PARAMETER

The mixer parameters will be initialized.

SYSTEM SETTING

The system settings will be initialized.

SCENE MEMORY

The scene memory will be erased.

ALL LIBRARY

All user libraries will be initialized.

If you attempt to initialize the scenes or libraries when a locked
scene or library exists, the following caution message will
appear.

fig.ScrInitLockedCaut.eps

If you press [F6 (DON’T INIT)], the locked data will not be
initialized; only the data that was not locked will be initialized.

If you press [F7 (CANCEL)], the initialization operation will be
cancelled.

If you press [F8 (INIT)], all data (including the locked data) will
be initialized.

M-400_v15_e.book 198 ページ２００８年６月２０日　金曜日　午後４時５分

Summary of Contents for M-400






























































































































































































































































Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands

RSS M-400, Owner'S Manual

Search results

Summary of Contents for M-400

Reviews:

Related manuals for M-400

Brands by name

Popular brands