124
Effects and 31-band GEQ
Effects and 31-band GEQ
fig.EffectDia.eps
The M-400 contains four internal effects (FX1–FX4), each of which allows you to select from 11 different
effect types including reverb and delay, or to use them as a dual 31-band GEQ.
You can use effects by inserting them into a channel, or in a send/return configuration using an AUX
channel in combination with an input channel as the FX return.
The FX 1–4 tab of the EFFECTS screen is used to perform effect operations.
Effects
About effects
IN LEVEL
OUT LEVEL
EFFECT
31 BAND GEQ
31 BAND GEQ
FX 1
FX
OUTPUT
SELECT
To CH 1 FX INSERT IN
To CH 48 FX INSERT IN
To AUX 1 FX INSERT IN
To AUX 16 FX INSERT IN
To MATRIX 1 FX INSERT IN
To MATRIX 8 FX INSERT IN
To MAIN L FX INSERT IN
To MAIN R FX INSERT IN
To INPUT PATCHBAY
FX
INPUT
SELECT
CH 1 FX INSERT OUT
CH 48 FX INSERT OUT
AUX 1 FX INSERT OUT
AUX 16 FX INSERT OUT
MATRIX 1 FX INSERT OUT
MATRIX 8 FX INSERT OUT
AUX 1 OUT
AUX 16 OUT
MAIN L FX INSERT OUT
MAIN R FX INSERT OUT
Same as the above
FX 2
Same as the above
FX 3
Same as the above
FX 4
M-400_v15_e.book 124 ページ ２００８年６月２０日 金曜日 午後４時５分
