119
Talkback/Oscillator
Talkback/Oscillator
fig.TB-OSCFlow.eps
Talkback is a function that sends the input of a mic connected to the TALKBACK MIC IN on the rear panel jack to an AUX bus, MATRIX bus,
MAIN L/R bus or MAIN C bus. This is useful when the mixer operator needs to convey instructions to performers on stage or to staff.
Oscillator is a function that generates pink noise, white noise, or a sine wave, and sends it to an AUX bus, MATRIX bus, MAIN L/R. or MAIN C.
This is useful when you need to measure the acoustical response of a hall, or when checking the connections of external devices.
You can also output the talkback or the oscillator directly via the output patchbay without routing the signal through a bus.
Talkback and oscillator operations are performed in the Talkback/Oscillator section.
fig.TalkbackOscSectGuide.eps
A.
MIC LEVEL knob
This adjusts the preamp gain of the TALKBACK MIC input.
B.
DISP button
This accesses the TALKBACK/OSCILLATOR screen, where you can make talkback settings and oscillator settings.
C.
TALKBACK button
This turns talkback on/off. It will be lit when talkback is on.
About talkback and oscillator
Talkback/Oscillator section
MAIN
L R
L R
SOLO
AUX
1 2
16
L R
L R
1 2
16
MAIN
SOLO
AUX
WHITE NOISE
PINK NOISE
SINE WAVE
TALKBACK
LEVEL
TALKBACK
LEVEL
TALKBACK
ON
SW
OSC
LEVEL
OSC
LEVEL
OSC
ON
SW
MAIN L, R, AUX 1-16,
MATRIX 1-8 SW
MAIN L, R, AUX 1-16,
MATRIX 1-8 SW
TALKBACK
OSCILLATOR
GAIN
PHANTOM
+48V
A/D
TALKBACK MIC
TO MAIRIX 1-8
TO OUTPUT PATCHBAY
TO OUTPUT PATCHBAY
TO MAIRIX 1-8
A
B
C
M-380_e1.book 119 ページ ２０１０年６月３０日 水曜日 午前１０時３１分
