RSS M-300, Owner'S Manual

Page: 55 / 224

55
AUX, MTX, MAIN operations
AUX, MTX, MAIN operations
Most operations for the AUX, MTX, and MAIN can be performed in the CHANNEL EDIT section. Here we will explain channel operations
using the CHANNEL EDIT section.
fig.ChEditSection.eps
Operations using the CHANNEL EDIT section
1.
Use the [SEL] buttons of the fader module section to
select the channel that you want to edit.
fig.SELBtn.eps
Each time you press the MAIN [SEL] button, it will select the MAIN L,
MAIN R, or MAIN C one after another.
2.
The selected channel is shown in the channel indication
at the upper center of the screen.
fig.ScrSelectedAux.eps
1.
In the CHANNEL EDIT section, press [CH DISP].
The CHANNEL DISPLAY screen will appear.
fig.ScrChAux.eps
Selecting the channel to edit
[SEL]
[SEL]
Viewing the parameter values
Even if you operate the knobs of the CHANNEL EDIT section
without accessing the CHANNEL DISPLAY screen, the value
of the currently-operated parameter is shown in the sub-
display area.
M-300_e.book 55 ページ ２０１０年４月２２日 木曜日 午前８時１７分