RSS M-300 Owner'S Manual Download Page 154

Page: 154 / 224

154

Other settings and functions

Access the SYSTEM screen.

fig.ScrSystem.eps

Press [F1 (INIT)].

fig.ScrInitGuide.eps

The INITIALIZE popup will appear.

Initialize section select buttons

These buttons select the sections to be initialized.

Use the initialize section select buttons to select the
sections that you want to initialize.

You can select the following sections:

SYSTEM SETTING includes the following items:

• The M-300’s sampling frequency setting

• Panel, and display brightness settings

• REAC settings

• Remote settings

Press [F8 (OK)].

fig.ScrInitConf.eps

A message will ask you to confirm the operation.

When you press [F8 (INIT)], the section you selected in
step 3 will be initialized.

If you press [F7 (CANCEL)], the operation will be cancelled.

Initializing the mixer settings

MIXER PARAMETER

The mixer parameters will be initialized.

SYSTEM SETTING

The system settings will be initialized.

SCENE MEMORY

The scene memory will be erased.

ALL LIBRARY

All user libraries will be initialized.

USER PREFERENCE

The user preferences will be initialized.

If you attempt to initialize the scenes or libraries when a
locked scene or library exists, the following caution message
will appear.

fig.ScrInitLockedCaut.eps

If you press [F6 (DON’T INIT)], the locked data will not be
initialized; only the data that was not locked will be
initialized.

If you press [F7 (CANCEL)], the initialization operation will be
cancelled.

If you press [F8 (INIT)], all data (including the locked data) will
be initialized.

M-300_e.book 154 ページ２０１０年４月２２日　木曜日　午前８時１７分

Summary of Contents for M-300

































































































































































































































Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands

RSS M-300, Owner'S Manual

Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands