RSS M-300 Owner'S Manual Download Page 127

Page: 127 / 224

127

USB memory recorder

fig.ScrRcdrDestSelectGuide.eps

The RECORDER DESTINATION SELECT popup will appear.

Output-destination select buttons

Use these to select the output-destination channel for the
USB memory recorder.

You can select more than one output-destination channel.

Current destination indication

This indicates the current output-destination channel.

If more than one output-destination channel are exist, the
lowest number channel is shown.

The function buttons have the following operations:

Move the cursor to the channel that you want to use as
the output-destination, and press [ENTER] to select it.

Press [F8 (CLOSE)] to close the popup.

Make settings for the R channel in the same way.

Press [REC].

The USB memory recorder will be in record-ready condition.

Press [

Recording to USB memory will begin, and the sub-display
area will indicate the recording time.

Pressing [REC] during recording lets you split the WAV file.

To stop recording, press [

Press [

] or [

] to select a WAV file.

The selected WAV file is shown in the sub-display area.

Press [

The selected WAV file will play.

The sub-display area shows the playback time.

fig.SubDispRcdr.eps

Pressing and holding [

] during playback rewinds the

playback, and pressing and holding [

] fast-forwards it.

To stop playback, press [

Access the RECORDER screen.

From the song list, select the desired WAV file.

Press [F5 (NAME EDIT)].

fig.ScrNameEdit.eps

The NAME EDIT popup will appear.

Use the name edit field to edit the file name.

Press [F8 (OK)] to finalize the name you edited and close
the popup.

If you press [F7 (CANCEL)], your edits will be discarded and
the popup will close.

For details on name editing, refer to “Editing a name” (p. 37).

Access the RECORDER screen.

From the song list, select the WAV file that you want to
delete.

Press [F6 (DELETE SONG)].

fig.ScrDelWavConf.eps

A message will ask you to confirm that you want to delete
the WAV file.

Press [F8 (DELETE)] to delete the WAV file you selected in
step 2.

If you press [F7 (CANCEL)], the WAV file will not be deleted.

[F8 (CLOSE)]

Closes the popup.

Recording to USB memory

Playing WAV files from USB memory

Renaming a WAV file

Deleting a WAV file

M-300_e.book 127 ページ２０１０年４月２２日　木曜日　午前８時１７分

Summary of Contents for M-300

































































































































































































































Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands

RSS M-300, Owner'S Manual

Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands