RSP TC20, Installation And Maintenance Manual

Page: 14 / 20

14 M0119-1 version 3.1
Clean air sealings Wipe air sealings clean with a lint free
cloth.
Clean spring-loaded signal pins Clean the contact surfaces of the
spring-loaded signal pins with a nylon
brush.
NOTE!
Signal pins shall be cleaned whenever
blackened.
3.2.4 Cleaning and lubrication of tool attachment
The following maintenance activities should be carried out on the TA every 6th month or
after 250,000 tool changes, whichever comes first.
Action Note
Clean locking cavities Clean the cavities of the locking balls
with a lint free cloth.
NOTE!
It is important that this is done or else
there is a risk that the tool attachment
jams.
Clean contact surfaces of air sealings Wipe the contact surfaces of the air
sealings clean with a lint free cloth.