background image

Features and specifications

Tone/pulse (tone priority) ______________________________Wrap around rubber grip

Talk and monitor modes_______________________________________Waterproof - IP64

Last number redial_________________________________________________Polarity test

Ten number memory (24 digits) _____________________________Easy battery change

Microphone mute ___________________________Battery life (alkaline) 2 years typically

Ringer (sounder) ______________________________________________Battery low LEd

Monitor impedance >300k

½

_____________________Protected against lightning surges

Data-safe monitor ____________________________________Time break recall (100ms)

Minimum line current <10mA ___________Over-current protected - no repair required.

RS

stock no. 801-493

Issued January 1998

9990

UTS-E All Weather 

Telephone Test Set

Instruction Leaflet

Dialling

UTS automatically selects tone dialling when connected to a line.

Pulse dialling selection

Connect to line then press PULSE before you go off-hook (Idle or Monitor Mode).You can
switch to Tone dialling part way through a call by pressing * (not dialled out). The dialling
mode will revert to Tone when returning to idle mode or if the line is disconnected for 1
second.

Last number redial

Press LNR/PAUSE (first action).

Flash

Press FLASH.

Program a memory

Go off-hook, press STO, enter the telephone number then press MEM, choose and press
location (1-9 or 0).

2

ABC

5

JKL

8

TUV

0

OPER

1

4

GHI

7

PRS

3

DEF

6

MNO

9

WXY

#

Batt low

PULSE

MEM

STO

POL

LNR/PAUSE

FLASH

Figure 1.

The information provided in 

RS

technical literature is believed to be accurate and reliable; however, RS

Components assumes no responsibility for inaccuracies or omissions, or for the use of this information, and all use
of such information shall be entirely at the user’s own risk.
No responsibility is assumed by RS Components for any infringements of patents or other rights of third parties
which may result from its use.
Specifications shown in RS Components technical literature are subject to change without notice.

RS Components, PO Box 99, Corby, Northants, NN17 9RS Telephone: 01536 201234

An Electrocomponents Company

© RS Components 1998

9990

Summary of Contents for UTS-E

Page 1: ...E before you go off hook Idle or Monitor Mode You can switch to Tone dialling part way through a call by pressing not dialled out The dialling mode will revert to Tone when returning to idle mode or if the line is disconnected for 1 second Last number redial Press LNR PAUSE first action Flash Press FLASH Program a memory Go off hook press STO enter the telephone number then press MEM choose and pr...

Page 2: ...ain or disconnect the line cord to go on hook High impedance monitor Press this button momentarily to monitor the line Monitor will stay on while connected to the line and will time out around 1 minute after disconnection Mute Tx cut off Press this button to cut off transmission for privacy or to eliminate sidetone in noisy areas Release to talk Polarity test ground start operation To test polarit...

Page 3: ...ain or disconnect the line cord to go on hook High impedance monitor Press this button momentarily to monitor the line Monitor will stay on while connected to the line and will time out around 1 minute after disconnection Mute Tx cut off Press this button to cut off transmission for privacy or to eliminate sidetone in noisy areas Release to talk Polarity test ground start operation To test polarit...

Page 4: ...E before you go off hook Idle or Monitor Mode You can switch to Tone dialling part way through a call by pressing not dialled out The dialling mode will revert to Tone when returning to idle mode or if the line is disconnected for 1 second Last number redial Press LNR PAUSE first action Flash Press FLASH Program a memory Go off hook press STO enter the telephone number then press MEM choose and pr...

Reviews: