RS PRO RSDM-9060, User Manual

Page: 154 / 412

154
rspro.com
User Mode – Switch Mode (Relay)
Overview
It is the mode driving Relay to control external
circuit with up to 4 pins available for use
simultaneously. Refer to the following
introductions along with diagrams for more
details. Please see the digital I/O commands on
page 259 for full usage details.
Related
Commands
DIG:INT:MODE IO (switch to IO mode)
DIG:INT:DATA:SET 1,0,1,0
=> OUT1(Pin5) : RELAY OFF
OUT2(Pin6) : RELAY ON
OUT3(Pin7) : RELAY OFF
OUT4(Pin8) : RELAY ON
Pin Assignment Pin No User Mode Description
1 VCC Out Option(Vcc:+5V)
2 Flyback Diode Use (connect to Pin1 or Ext
Vcc)
3 Digital Ground GND
5 OUT1 Use
6 OUT2 Use
7 OUT3 Use
8 OUT4 Use