RR Mechatronics STARRSED RS User Manual Download Page 47

Page: 47 / 259

6.3.2 - Display Sample history

In the window Select date to show results: double click on the file name to select the results of the selected

date.

Press

Refresh to refresh the list of available files.

In the window

Sample ID

, type the sample ID information and press Search.

Press Options for the following search options:

•

Show today's results.

•

Show today's results from a selected time frame of the day.

•

Show results of a number of past days. Default value is set for 7 days.

•

Show results of a specific day.

•

Show results of the range between the first selected date to the next selected date.

Select in the table a 'Sample ID' and click the button

Display full patient result

for more detailed information of

the selected sample.

In the header of the table the names of the columns are shown. Double-click the header of any column to

sort the table by this column in ascending order.

Starrsed program

MRN-071-2-EN version 7.02 Starrsed RS

Summary of Contents for STARRSED RS




































































































































































































































































Search results

Summary of Contents for STARRSED RS

Reviews:

Related manuals for STARRSED RS

Brands by name

Popular brands

RR Mechatronics STARRSED RS, User Manual

Search results

Summary of Contents for STARRSED RS

Reviews:

Related manuals for STARRSED RS

Brands by name

Popular brands