RR Mechatronics STARRSED RS User Manual Download Page 29

Page: 29 / 259

2.3.5 - Starrsed Disinfectant

Starrsed Disinfectant is a dedicated IVD product, developed exclusively for automatic disinfection of the

waste system of Starrsed ESR analyzers.

This reagent is delivered in a 5-liter container (QRR 010947).

2.3.6 - Starrsed Cleaning Agent

Starrsed Cleaning Agent is used to remove protein deposition from the Westergren pipettes of Starrsed ESR

analyzers.

Starrsed Cleaning Agent needs to be prepared for a cleaning procedure which is used in level 4

maintenance.

Starrsed Cleaning agent is supplied in 100 ml bottles.

QRR010905: 1 bag of 2 bottles

2.4 - Accessory kit

The Starrsed RS comes with an accessories kit. For a complete list of the the contents of accessories kit, see

Appendix - Article references

2.5 - Starrsed line of ESR instruments

The Starrsed line of ESR automated instruments is unique by the fact that it has automated the Westergren

Method and fully complies with the published reference method, including working with diluted EDTA blood.

The Starrsed line offers several types of ESR analyzers. Our solutions range from tube-based to rack-based

to track-based, the latter resulting in the highest level of automation possible. Laboratories that operate

different Starrsed instruments in different capacities are assured that correlations are precise and fully

reliable.

Instrument description

MRN-071-2-EN version 7.02 Starrsed RS

Summary of Contents for STARRSED RS




































































































































































































































































Search results

Summary of Contents for STARRSED RS

Reviews:

Related manuals for STARRSED RS

Brands by name

Popular brands

RR Mechatronics STARRSED RS, User Manual

Search results

Summary of Contents for STARRSED RS

Reviews:

Related manuals for STARRSED RS

Brands by name

Popular brands