RPM Systems Corporation
March, 2016 Page 14
MPQ Manufacturing Programmer User's Guide
2.5 Deleting Images from Programmer Flash
It is not necessary to delete an image from the target Flash before replacing it with a new image. However,
there are occasions when it may be desirable to remove an image from the programmer, for instance to ensure
that it is no longer used to program devices. To delete images from the programmer, start the Image Manager
window as previously described, and select the image to be deleted, either by clicking on the image number or
using the keyboard arrow keys. Then select the Image/Delete Image option from the MP Manager menu bar,
or the Delete button on the tool bar. You will be queried to be certain that you want to delete the image. If you
chose to do so, the image will be deleted from the programmer.
2.6 Programming Devices from MP Manager
Once an image or images have been loaded into the programmer Flash, programming operations can be
initiated directly from MP Manager if you so desire. First, ensure that the Target cable is connected between the
MPQ's Target connector and the system or systems to be programmed (see appendices for a discussion of
target system connections). In the Image Manager window, select the image to be programmed. Next, open
the Programming Manager by selecting the Programming Manager tool bar button, or by selecting the View/
Programming Manager option from the MP Manager menu bar. This will cause the Programming Manager
window to be opened.