manualshive.com logo in svg

Royalcraft Wilmslow 6 Seat Set, Assembly Instructions, Page: 1 / 5

Share
Download
Royalcraft Wilmslow 6 Seat Set Assembly Instructions Download Page 1

 

Wilmslow 6 Seat Set –   

Rectangular Table

 

  Assembly Instructions

 

 

Produced in China for A. Mir & Co., Ltd. 

© A. Mir & Co., Ltd.                 

                                                                                                                                         

 

1 / 5 

 

www.royalcraft.co.uk

 

Product size: 

L150*W90*H72 cm 

 
 

 

 

The frame of this product is manufactured from mild steel coated with a weather resistant paint. 

Steel has a natural tendency to rust over time and, whilst we expect you to be able to enjoy your 

furniture for many years to come, we recommend that you check the product from time to time for 
signs of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form, 

you should clean the affected area and apply a suitable “thinners based” touch-up paint.   

Such paints are readily available from all good hardware and DIY stores.”

 

 
 
 

This product is for Domestic Use only! 

 

IMPORTANT, RETAIN FOR FUTURE REFERENCE 

READ CAREFULLY

 

 

 
 

Summary of Contents for Wilmslow 6 Seat Set






Reviews:

No comments