Royalcraft Metal Planter Stand Assembly Instructions Download Page 1

Metal Planter Stand

 

Assembly Instructions 

 

 
Produced in China for A. Mir & Co., Ltd. 

© A. Mir & Co., Ltd.

 

                                                                                                                                                           

 

1 / 4 

 

www.royalcraft.co.uk

 

Product size: 

W60*D42*H91cm 

 
 
 

 

 
 

This product is manufactured from mild steel coated with a weather resistant paint. Steel has a 
natural tendency to rust over time and, whilst we expect you to be able to enjoy your furniture 
for many years to come, we recommend that you check the product from time to time for signs 
of paint damage and/ or rust. If the paint should become damaged, or if rust begins to form, 
you should clean the affected area and apply a suitable “thinners based” touch-up paint. Such 
paints are readily available for all good hardware and DIY stores.”

 

 

This product is for Domestic Use only! 

 

IMPORTANT, RETAIN FOR FUTURE REFERENCE 

READ CAREFULLY 

 

Summary of Contents for Metal Planter Stand

Page 1: ...lst we expect you to be able to enjoy your furniture for many years to come we recommend that you check the product from time to time for signs of paint damage and or rust If the paint should become damaged or if rust begins to form you should clean the affected area and apply a suitable thinners based touch up paint Such paints are readily available for all good hardware and DIY stores This produ...

Page 2: ...he parts listed Wash the frame with a mild soap and water only Rinse and dry thoroughly To extend the product life and appearance it is advisable to store the furniture in a cool dry place over winter Ensure that the furniture is clean and completely dry before putting in to storage In the event of the surface paint chipping or scratching the easiest way to treat the problem is to treat with a spr...

Page 3: ... size Parts List Part No Diagram Qty Part No Diagram Qty A Frame 1 PC B Top Tray 1 PC C Middle Tray 1 PC D Bottom Tray 1 PC N10 M5 10 Bolt 12 PCS DP Washer 12 PCS F4 M5 Nut 12 PCS AK Allen Key 1 PC F1 Spanner 1 PC Please note the diagram is for reference only it may not fully represent the actual appearance of the parts Step by step assembly instructions ...

Page 4: ...Top Tray B Middle Tray C and Bottom Tray D to the Frame A using Washers DP Bolts N10 and Nuts F4 Tighten the Bolts and Nuts by Allen Key AK and Spanner F1 Do not overtighten Warning This product should NOT be used by Children and Kids Load limit is 10 kg per tray Don t place goods near the tray rim This Planter Stand should be stood close to the wall corner PLEASE KEEP THESE INSTRUCTIONS FOR FUTUR...

Reviews: