Royal Alpha 9180sc Instruction Manual Download Page 26

Page: 26 / 80

(Continued)

TAX RATE

VAT TAX RATE (commonly used in Europe)

FLAG 13 MUST FIRST BE PROGRAMMED AS FOLLOWS:

Turn the key to the "PRG" (PROGRAM) position.

2. If a PRG/Z Manager Password has been programmed,

ENTER

the

(PASSWORD #)

, then

PRESS

the

[CHECK]

key, or if you did not program a PRG/Z Manager Password, go to Step 3.

ENTER (13)(2)

, then

PRESS

the

[VOID]

key.

PROGRAMMING THE VAT TAX RATE:

"PRG" + (TAX #) + [TAX SHIFT] + (TAX RATE) + [FOOD STAMP]

                          1-4                                         0 - 99.999%
             TAX 1 = VAT 1
             TAX 2 = VAT 2
             TAX 3 = VAT 3
             TAX 4 = VAT 4

Example: 10% Tax Programming.

Turn the key to the "PRG" (PROGRAM) position.

2. If a PRG/Z Manager Password has been programmed,

ENTER

the

(PASSWORD #)

, then

PRESS

the

[CHECK]

key, or if you did not program a PRG/Z Manager Password, go to Step 3.

ENTER (1)

PRESS

the

[TAX SHIFT]

key,

ENTER (10000)

, then

PRESS

the

[FOOD STAMP]

key.

TO PROGRAM A SECOND VAT TAX RATE:

Example: 5%

Turn the key to the "PRG" (PROGRAM) position.

2. If a PRG/Z Manager Password has been programmed,

ENTER

the

(PASSWORD #)

, then

PRESS

the

[CHECK]

key, or if you did not program a PRG/Z Manager Password, go to Step 3.

ENTER (2)

PRESS

the

[TAX SHIFT]

key,

ENTER (5000)

, then

PRESS

the

[FOOD STAMP]

key.

Summary of Contents for Alpha 9180sc

















































































Search results

Summary of Contents for Alpha 9180sc

Reviews:

Royal Alpha 9180sc, Instruction Manual, Page: 26 / 80

Search results

Summary of Contents for Alpha 9180sc

Reviews: