background image

3   ~   7

9  ~  10

10  ~  11

11  ~  11

12  ~  12

12  ~  12

12  ~  12

13  ~  13

14  ~  21

14  ~  17

18  ~  21

22  ~  36

1. Safety Precautions

   Safety Precaution

1

Failure to comply any of the following safety procedures could result in  serious injury.
Please read the instructions carefully and keep for future reference.

1.  Only a licensed electrician should install wiring and outlet for the laminator.

2.  Ensure the unit is plugged into a properly grounded outlet with the correct
     voltage.

3.  Keep hands and clothing (ie.Neckties) away from the rollers. The rollers are pinch
     points that can trap body parts or clothing and cause serious injury.

4.  Keep flammable and wet objects away from the machine.

5.  Place machine on a level surface.

6.  Avoid excessive sunlight, humidity and extreme temperatures.

7.  Ensure the unit is turned off, cooled, and unplugged from the outlet prior to
     moving and/or repairing.

8.  Keep out of reach of children.

9.  Only Royal Sovereign authorized maintenance and service technicians should
     make repairs.

10. Do not attempt to laminate items that exceed total recommended material
     thickness for the unit.

11. When cleaning the machine, don't  use flammable sprays or materials.

12. Do not touch the rollers when they are hot or place foreign objects inside the
     machine.

13. Do not cover the surface of the machine until the machine has completely cooled.

Summary of Contents for RSC-1400LS











































Reviews: