Royal Enfield Interceptor 650 2018, Owner'S Manual, Page: 50 / 141

49
ROLL OVER SENSOR
In the event of motorcycle falling over on either of its sides with the engine running and the gear engaged the roll over
sensor will disable both the ignition and fuel systems and switch “OFF” the engine. This is to prevent further damage to
the motorcycle and the rider.
To reset the roll over sensor and reactivate the ignition and fuel systems.
n Ensure the motorcycle is parked upright on a firm surface.
n Ensure gear is in neutral position and the neutral lamp is glowing in the instrument cluster.
n
Turn “OFF” ignition and switch “OFF” engine kill switch, wait for a few seconds and turn “ON” the Ignition and switch
WARNING INDICATIONS AND SAFETY SYSTEMS
“ON” engine kill switch once again, to start the engine.
13. TACHOMETER
This indicates the engine speed in RPM.
CAUTION
When the indicator glows continously and if the engine speed is above idle, stop the vehicle immediately and get the
engine inspected and corrected through a nearest Authorised Royal Enfield Service Centre. Failure to do so can cause
engine damage.